Ga si wotsɔ ga wɔe ƒe aɖaka si wotsɔ gayibɔ wɔe .

* Wowɔe tso gayibɔ si wotsɔ ƒo ƒui si ƒe nyonyome deŋgɔ me.

* dzoxɔxɔ si wotsɔ wɔa dɔe hena nuteɖeamedzi dzi ɖeɖe kpɔtɔ.

* Wotsɔe na le klass eve me le nyateƒetoto me – Dzesiwo: 2 & 3.

* Mɔ̃ siwo wotsɔ t-slots kple cored as-cast slots na be woatsɔ ablae bɔbɔe.

* Agbɔsɔsɔ tɔxɛwo abe alesi asisi la ƒe nudidi tɔxɛa hã na ene.

• Wotsɔe na abe eve siwo sɔ ene.

Teƒe si wotso:Hebei, China

Mɔɖegbalẽ:Ƒe 1

Kpekpeɖeŋu si wowɔ ɖe ɖoɖo nu:OEM, ODM, OBM

Adzɔnu ƒe ŋkɔ:Storan

Kpɔɖeŋu xexlẽdzesi:2009

Nusiwo wotsɔ wɔa nuawoe

Nyateƒetoto:Wotrɔ asi le eŋu .

Dɔwɔwɔ ƒe nɔnɔme:Wowɔ ɖoɖo ɖe eŋu

Nu ƒe kpekpeme:Wotrɔ asi le eŋu

Ŋutete:Wowɔ ɖoɖo ɖe eŋu .

Nusiwo wotsɔ wɔe:HT200-300

Specification:Trɔ asi le eŋu .

Surface:Flat, T-slots kple cored as-cast slots

Dɔwɔƒe si le dɔ wɔm ƒe sesẽ:HB160-240

Surface treatment:Asi-wo ƒo alo wu enu-mimi .

Foundry ƒe ɖoɖo:Sand casting alo centrifugal castings

Molding Type:Resin Sand Molding

Nutata:Primer kple modzakaɖeɖe

Surface Coating:Ami si wotsɔna ƒoa nu kple plastik-ti alo wotsɔ amadede si tsi tre ɖe nu ŋu tsyɔ edzi

Packaging:Plywood Aɖaka

Ɣeyiɣi si woatsɔ awɔ dɔe .

Mɔ̃ɖaŋununya ƒe nɔnɔmetata si ku ɖe aɖaka si wotsɔ gayibɔ wɔe ƒe aɖaka si wotsɔ ƒo ƒui ŋu .:

Ga si wotsɔ gayibɔ wɔe ƒe aɖaka si wotsɔ ga wɔe: HT200-HT300 na tsitretsitsi ƒe tsitretsitsi

Nusi le aɖaka si wotsɔ gayibɔ wɔe me kpɔa ŋusẽ ɖe edzi tẽ eye wòdea pɛpɛpɛ—vevietɔ le dɔwɔƒewo ƒe nɔnɔme sesẽwo me. Storaen tia HT200-HT300 Grey Cast Iron na míaƒe Iron Square Box Solutions, si nye akɔbli si ƒe asi bɔbɔ si da sɔ le sesẽme, liƒo, kple tsitretsitsi ɖe outperform standard alternatives ŋu. Alesi nya sia kpɔa egbɔ be wò dɔwɔnua te ŋu nɔa te ɖe dɔwɔƒe zazã sesẽe nu enye si .:

1. Dɔwɔƒe ƒe sesẽme na dɔ sesẽ wɔwɔ .

Wotrɔ asi le HT200-HT300 ƒe gayibɔ (160–240HB ƒe sesẽme) ŋu hena sesẽme .:

Superior abrasion resistance: Eƒe pearlitic microstructure naa 20% ƒe wear resistance si nyo wu gayibɔ siwo le bɔbɔe wu, si léa anyigba siwo le gbadzaa (RA ≤1.6μm) to 10,000+ clamping cycles me. Esia le vevie ŋutɔ na aɖaka siwo wotsɔ gayibɔ wɔe siwo wotsɔ ƒo ƒui siwo wozãna le nutunu alo tomekuku me, afisi dɔwɔnu ƒe kadodo ɣesiaɣi agblẽ nu le nusiwo fa wu ŋu.
Kpekpeme kpekpe ƒe kpekpeɖeŋu: kple 200–300MPa tensile ŋusẽ, míaƒe Iron Square Box kpɔɖeŋuwo léa 500kg agba siwo meʋãna o—si sɔ nyuie na kpekpeɖeŋunu gãwo le 3D dzidzedze alo mɔ̃ ƒe ɖoɖowɔwɔ me.

2. Dzoxɔxɔ ƒe liƒo hena nyateƒetoto si nɔa anyi ɖaa .

Dzoxɔxɔ ƒe tɔtrɔ (10°C–40°C) maɖe asi le HT200-HT300 ƒe pɛpɛpɛ ŋu o .:

Dimensional consistency: Dzoxɔxɔ ƒe kekeɖenudɔwɔwɔ si le bɔbɔe (11.6×10⁻2/°C) léa ±0.02mm/m ƒe dzɔdzɔenyenye ɖe te le 1000mm dzi, si naa kakaɖedzi be kakaɖedzi le eŋu (90°±5’) kple parallelism dzidzedze le CMMS alo optical comparators me.
Nuteɖeamedzi Gbɔkpɔkpɔ ƒe Atikewɔwɔ: 550°C anneal ɖea 90% le casting stress me, si xea mɔ na micro-cracks siwo gblẽa nu le kpɔɖeŋu siwo ƒe asi bɔbɔ wu ŋu le ɣeyiɣi aɖe megbe.

3. Aɖaŋudɔwo wɔwɔ doa ŋusẽ nuawo ƒe dɔwɔwɔ .

Storaen ƒe dɔwɔwɔwo dzina ɖe edzi be HT200-HT300 ƒe ŋutetewo dzina ɖe edzi .:

Resin Sand Casting: Ewɔa gli ƒe titrime ɖeka (15–30mm) kple T-slots siwo sɔ pɛpɛpɛ (14–24mm ƒe kekeme, ±0.1mm ƒe mɔɖeɖe) hena agba mama si nɔa anyi ɖaa.
Tiatiawɔblɔɖe asi-scrated nuwuwu: na veviedodonu, aɖaŋudɔwɔlawo trɔa asi le anyigbadzinuwo ŋu va ɖo 25+ contact points/25x25mm, si dzia agbatsɔtsɔ ƒe teƒe ɖe edzi 30% eye wòɖea dɔwɔwɔ ƒe akpa si nye deflection dzi kpɔtɔna—si nye Class 0 flatness (≤0.0005mm/m) ƒe ɖoɖo.

4. Dɔwɔwɔ si ŋu kpeɖodzi le le nɔnɔme siwo bia nu geɖe me .

Míaƒe Iron Square Box Solutions Excel afisi wowɔa nu pɛpɛpɛ le vevie .:

Mɔ̃ sesẽwo me dzodzro: A 300x300x300mm Cast Iron Square Box doa alɔ 200kg diesel mɔ̃ ƒe akpa aɖewo le flatness dodokpɔ me, kple HT200 ƒe vibration-dampening nɔnɔmewo dzi ɖe kpɔtɔ dzidzedze vodadawo.
CNC Machining FixTuring: HT300 ƒe 240HB ƒe sesẽme tsi tre ɖe dɔwɔnu ƒe ŋusẽkpɔɖeamedzi ŋu, si naa dɔwɔwɔ ƒe akpa siwo woɖo ɖe ɖoɖo nu le ±0.01mm me na akpa ƒe nɔnɔmetata siwo sesẽ le nutunuwo wɔwɔ me.

5. Storaen ƒe Nuwo Ŋugbedodo: Nɔnɔme si Naa Nɔnɔ Kple Eƒe Nɔnɔme Ŋu

Wotrɔ asi le eŋu ɖe wò hiahiãwo nu: Tia HT200 na zazã le mɔ gbadza nu alo HT300 na agba siwo gbɔ eme, le lolomewo me tso 100x100mm bench models va ɖo 600x600mm dɔwɔƒewo ƒe fixtures.
Nyonyome si dzi nàte ŋu aka ɖo: Aɖaka ɖesiaɖe ɖo GB/T 4986-2004 kple ISO 8512-1 ƒe dzidzenuwo gbɔ, si ŋu CMM ƒe ŋkuléle ɖe wo ŋu ɖo kpee, eye ƒe 1 ƒe mɔɖegbalẽ si wotsɔ tsi tre ɖe ŋutilãmenu siwo gblẽ ŋu lae le megbe nɛ.
Ɣeyiɣi Didi ƒe Asixɔxɔ: Míaƒe HT200-HT300 ƒe kpɔɖeŋuwo nɔa anyi didi wu aɖaka siwo wozãna le mɔ vovovowo nu, si naa ga si wozãna ɖe nuawo tɔ ŋu ƒe ƒuƒoƒo si dzi woɖoa ŋu ɖo ɖe dɔwɔnu siwo ŋu kakaɖedzi le siwo ŋu kakaɖedzi le ŋu.

Mègaɖe asi le nusiwo le eme ƒe nyonyome ŋu na wò aɖaka si wotsɔ gayibɔ wɔe si wotsɔ gayibɔ wɔe la o. Storaen ƒe HT200-HT300 xɔtutua ƒoa sesẽme, dzoxɔxɔ ƒe liƒo, kple nuwɔwɔ pɛpɛpɛ nu ƒu be nàkpɔ egbɔ be wò Iron Square Box la lé nyateƒetoto me ɖe asi le dɔwɔƒe sesẽtɔwo kekeake gɔ̃ hã me. Tso gbesiagbe fixturing dzi va ɖo ŋkuléle ɖe nu ŋu vevie dzi la, míaƒe nuwo ƒe tiatia kpɔa egbɔ be wò gadede asi na wò tsi tre ɖe ɣeyiɣi ƒe dodokpɔ ŋu—si ŋu dɔwɔnuwɔƒe xɔŋkɔ aɖe ƒe nunya le ye ɖo. Dzro míaƒe hatsotso me egbea eye nàkpɔ vovototo si le Premium Cast Iron wɔ me.

Asi-si wotsɔ ƒo ƒui ƒe nuwuwu: ±5μm pɛpɛpɛ le gayibɔ ƒe dzogoe ene me aɖaka me hena ŋkuléle ɖe nu ŋu vevie

Le dzidzedze kple fixturing pɛpɛpɛ me la, gayibɔ ƒe aɖaka si wotsɔ ƒo ƒui ƒe anyigba ƒe nuwuwu ate ŋu afia vovototo si le nyatakaka siwo ŋu kakaɖedzi le kple vodada siwo xɔa ga geɖe dome—vevietɔ le dɔwɔƒewo abe yamenutome, atikewɔnuwo, kple ʋuwɔƒewo ene me. Storaen kɔa nuwo me dzodzro ƒe dzidzenuwo ɖe dzi kple míaƒe Iron Square Box Solutions si me asi-si wotsɔ ƒo ƒu wɔe, si nye aɖaŋudɔwɔwɔ ƒe ɖoɖo si ɖoa ±5μm pɛpɛpɛ si womate ŋu atsɔ asɔ kple to mɔ̃-anyigba ƒe mɔnu bubuwo dzi o. Alesi finim sia si nye premium la trɔa dɔwɔnu dzrowo wozua dɔwɔnu siwo sɔ pɛpɛpɛ lae nye esi .:

1. Asiƒoƒo ƒe Aɖaŋu: Beyond Machine Grinding .

Togbɔ be mɔ̃wo ƒoƒo naa anyigba siwo dzi woda asi ɖo (RA ≤1.6μm) hã la, ŋkuléle ɖe nu ŋu vevie bia nusuekpɔmɔ̃ ƒe blibodede .:

Micro-Contact Optimization: Aɖaŋuwɔla bibiwo kple asi ƒoa anyigba ɖesiaɖe be woawɔ grid si nye 25–30 ƒe kadodo ƒe teƒe siwo sɔ pɛpɛpɛ le 25x25mm ɖesiaɖe me, si dzia agbatsɔtsɔ ƒe teƒe ɖe edzi 30%. Esia ɖea dɔwɔwɔ ƒe ʋuʋu dzi kpɔtɔna le agba siwo ƒe kpekpeme nye 200kg+ te, si wɔnɛ be wokpɔa egbɔ be mɔ̃ siwo wotsɔna ɖea dɔ le gbadzaa (≤0.0005mm/m)—vevietɔ hena kpeɖodzinana be wole tsitrenu (90°±5’) kple nusiwo sɔ kple wo nɔewo (≤0.01mm/m) (CMM) (Cmms).
blibomademade ɖeɖeɖa: To vovo na grinders siwo gblẽa stress alo micro vibrations susɔe la, asi ɖeɖe ɖa ɖea vodada siawo ɖa, tsɔa anyigba si sɔ ale gbegbe la wɔa dɔ abe nufiame dzidzenu na didimedzidzenuwo ƒe dodokpɔxɔwo ene.

2. Nuwo & Dɔwɔnawo ƒe Ðekawɔwɔ Na Nusiwo Nɔa Anyi Si Nɔa Anyi Didi .

Storaen ƒe gayibɔ si wotsɔ gayibɔ wɔe le dzogoe ene me asi-ƒoƒo ƒe ɖoɖoa dzea egɔme kple HT200-HT300 ƒe gayibɔ si ƒe amadede nye aŋutiɖiɖi (180–240hb ƒe sesẽme):

Scrapability Excellence: Míaƒe gayibɔ si wotsɔ ƒo ƒui ƒe wɔwɔme si le nyuie la xɔa akplɔ ƒe lãɖeɖe siwo sɔ pɛpɛpɛ, si wɔnɛ be aɖaŋudɔwɔlawo te ŋu trɔa asi le anyigba ƒe akpawo ŋu va ɖoa ±5μm gbadzaa le 300mm ƒe didimewo dzi—si sɔ nyuie na gayibɔ square box ƒe kpɔɖeŋu siwo wozãna le optical comparator setups alo gage block calibration me.
Dzoxɔxɔ ƒe liƒo: tsɔ kpe ɖe 550°C ƒe nuteɖeamedzi-ɖe-dziɖedzi anneal (si ɖe 90% le casting stress), asi-si wotsɔ ƒo ƒu tsi tre ɖe warping le 10°C–40°C nuto me, lé pɛpɛpɛ na ƒe bla nanewo ƒe zazã vevie.

3. Dɔdamɔnu siwo me micron ɖesiaɖe ƒe xexlẽme le .

Míaƒe asi-si wotsɔ ƒo gayibɔ square box solutions excel le nusiwo me wotsɔ ga geɖe de eme:

Yamenutome ƒe akpawo me dzodzro: 400x400x400mm Iron Square Box kpɔa egbɔ be ≤0.005mm deviation ne wole ŋku lém ɖe jet engine mounting brackets ƒe tsitretsitsi ŋu, si le vevie ŋutɔ na ʋuʋudedi si me ʋuʋudedi mele o.
Atikewɔnuwo wɔwɔ: Le amekoko ƒe dɔwɔnuwo ƒe ɖɔɖɔɖo me la, míaƒe anyigba siwo wotsɔ asi ƒo ƒui ƒe ±5μm ƒe nyateƒetoto naa kakaɖedzi dzogoe siwo sɔ na ƒumeŋuɖui ƒe dodo, si ɖea lãkusiwo ƒe agbɔsɔsɔ dzi kpɔtɔna 20%.
Ʋu ƒe nyonyome dzi kpɔkpɔ: Wozãnɛ tsɔ doa robot alɔwo kpɔna le mɔ̃memi ƒe kpekpe me, míaƒe aɖakawo léa parallelism me ɖe asi le 0.01mm/m me, si xea mɔ na misalignments siwo xɔa ga geɖe le ʋuʋudedi gã wɔwɔ me.

4. Storaen ƒe nugbɔ: Aɖaŋudɔwɔwɔ do go mɔ̃ɖaŋununya .

Customization without compromise: Tia tso dzidzenu ƒe lolomewo me (100x100mm–600x600mm) alo bia be woawɔ custom dimensions—every hand-scraped cast iron square box to 3D laser scanning me be nàkpɔ egbɔ be wowɔ ɖe GB/T 4986-2004 kple ISO 8512-1 dzi.
Durability built in: 5μm anti-corrosion oil ƒe nuwuwu kpɔa anyigba ta tso fafanu kple fafa me, si kekea míaƒe Iron Square Box ƒe kpɔɖeŋuwo ƒe agbenɔƒe ɖe enu 2X ne wotsɔe sɔ kple hoʋlila siwo womefa o le dɔwɔƒe ƒe nɔnɔme sesẽwo me.
Kakaɖedzi si dzi nàte ŋu aka ɖo: Ne wotsɔ ƒe 1 ƒe mɔɖegbalẽvi ɖo megbe na anyigba ƒe awudodo alo didime ƒe ʋuʋu la, míaƒe dɔwɔnu siwo wotsɔ asi ƒo la naa susu ƒe akɔdzeanyi hena ŋkuléle ɖe eŋu le afisiwo kpododonu menye tiatia o.

Ne numekuku veviwo bia sub-micron pɛpɛpɛ la, kakaɖedzi Storaen ƒe asi-si wotsɔ ƒo gayibɔ square aɖaka me kuxiwo gbɔkpɔnu. Menye dɔwɔnu dzrowo koe o, ke boŋ wonye aɖaŋudɔwɔwɔ ƒe aɖaŋu kple dɔwɔƒewo ƒe mɔ̃ɖaŋununya ƒe tsakatsaka, si wowɔ be wòawɔ ɖe egbegbe nuwo wɔwɔ ƒe dzidzenu sesẽwo dzi. Dzro míaƒe hatsotso me egbea eye nàke ɖe alesi ±5μm ƒe nyateƒetoto ate ŋu ado wò nyonyome dzikpɔkpɔ, fixturing, kple dzidzenu ƒe dɔwɔwɔwo ɖe dzi—si ƒe kakaɖedzi le adzɔnu ƒe dzeside si sea asixɔxɔ si le blibodede ŋu gɔme.

• • 

    Nɔnɔmetata ƒe nuŋɔŋlɔ ƒe numeɖeɖe 1 .

  • 

    Nɔnɔmetata ƒe nuŋɔŋlɔ ƒe numeɖeɖe 1 .

  • 

    Nɔnɔmetata ƒe nuŋɔŋlɔ ƒe numeɖeɖe 1 .

   

  
• 
• 
• 
• 
•